Acom 1000 HF + 6 m Linear Amplifier
Starting January 1st, 2024, a New single 4Cx800A high-performance ceramic-metal tetrode.

Technical Specifications
Frequency Coverage: All amateur bands 1.8-54MHz; extensions and/or changes on request.
Power Output: 1000 W PEP or continuous carrier, no mode limit.
Intermodulation Distortion: Better than 35 dB below rated output.
Full-BK (QSK) supported
Hum and noise: Better than 40 dB below rated output.
Harmonic Output Suppression:
1.8-29.7MHz - better than 50 dB below rated output;
50-54MHz - better than 66 dB below rated output.
Input and Output Impedances:
nominal value: 50 Ω unbalanced, UHF (SO239) type connectors;
input circuit: broadband, VSWR less than 1.3:1, 1.8-54MHz continuously (no tunings, no switching);
bypass path VSWR less than 1.1:1, 1.8-54MHz continuously;
output matching capability: better than VSWR 3:1 or greater at reduced output levels.
RF Gain: 12.5 dB typically, frequency response less than 1 dB (50 to 60 W drive power for rated output).
Primary Power: 170-264V (200, 210, 220, 230 & 240V nominal taps, 100, 110 & 120V taps on request, +10%-15%tol. ), 50-60Hz, single phase, 2000VA consumption at rated output.
Complies with CE safety and EMC requirements, as well as FCC-regulations (6, 10 & 12m bands lock provided).
Size & Weight (operating): WxDxH: 422x355x182mm, 18kg.