A594Dsp Axton 6-channel Dsp amplifier 4 x 76 watts Rms
6-channel Dsp with 6 processed preamplifier outputs (5 volts)
4-channel Smart Class-D amplifier with 4 x 50 W RMS
Control via iOS or Android app
Lietots neilgi, garantija vēl 1, 5 gadi.

Technical data
RMS output power
4 / 2 Ohm: 4 x 25 W RMS
4 / 2 Ohm: 4 x 76 W RMS with additional power supply
4 / 2 Ohm: 4 x 50 W max
4 / 2 Ohm: 4 x 150 W max with additional power supply
Playback range
20Hz ~ 48 kHz
Inputs
4x High-Level with Auto-turn-On (DC-Offset)
1x optical input (Toslink)
1x coaxial (USB)
1x Bluetooth audio streaming
Outputs
4x High Power with DSP configuration (CH1 - CH4)
6x RCA cinch with DSP configuration (CH1 - CH6)
1x optical output (Toslink) with DSP configuration
Connections
1x 20 pin main connection
1x BATT/GND power terminal
1x Bluetooth antenna
1x port for remote control
Further amplifier data
High-level sensitivity: 8.4 Vrms
High-level impedance: 39 Ohm
RCA max voltage: 5 Vrms
Operating voltage: 7.5 V - 16.5 V
Signal-to-noise ratio digital input: > 112 dB
Signal-to-noise ratio analog input: > 106 dB
THD: 1 KHz < 0.02%
Attenuation factor: >= 200
No-load current consumption: 0.23 A
Maximum current consumption: 20 A
Max. Remote output current: 0.3 A
DSP
DSP type: AKM7735 Dual DSP
ADC: 2x 24-bit
DAC: 2x 32-bit
DSP MHz: 2x 150 MHz
Audio sampling frequency: 192 kHz
Bluetooth
Bluetooth class: 2
Bluetooth power: 1 mW / 0 dBm
Bluetooth range: 10 m
Bluetooth frequency: 2.4 - 2.48 GHz
Dimensions
(L x W x H) 218 x 40 x 114 mm
Scope of delivery
1x A594DSP
1x Bluetooth antenna
1x operating instructions
Note
The A594DSP is supplied without a connection cable.
Please use the configurator to find the right Plug & Play connection cable for your vehicle.
For stand-alone applications without radio, we recommend the ATS-ISOFLX cable.